Shenzhen Jun Tai Feng Novel Material co., ltd



Thermal Silica Gel

Shenzhen Jun Tai Feng novel material co., ltd

Tel: 0755-29694891 0755-29694892

Fax: 0755-29694893



Address: Shenzhen Bright new District, public-ming potato field PO Community Emerging Industrial Zone A, the first second floor 201

Thermal Silica Gel
Thermal Silica Gel

First, use:

Thermal silica abbreviationThermal adhesiveMainly in the company for the LED power supply encapsulation and development of special potting gum, this glue has excellent waterproof and heat dissipation, to maximize the guarantee of product waterproof and service life.

function and characteristics

Second, JTF-108 series of thermal glue mainly used for the LED power supply potting its main functions are as follows:

1, with excellent waterproof, can protect products and electrical components are not water immersion;

2, with excellent heat dissipation, can ensure that the product's electrical components in the use of the process will not be due to excessive temperature and affect the service life;

3, with super Anti-ultraviolet ability, to ensure that the product in its service life encapsulation with glue never brittle;

4, with excellent weather performance, to ensure that the electrical components in a wide range of temperature ( -40~220℃) and the normal use of special circumstances, so that the use of the product area almost unlimited;

5, this series of products are cured at room temperature, the main curing mechanism is with the air moisture reaction and curing, so the temperature is not sensitive, so that its curing conditions require simpler, easier to operate.

This product overcomes the addition of molding power potting gum cold shrinkage resulting in the "shelling" of the fatal shortcomings!

Third, the use of specifications:

Four: How to use:

1, with glue, this series of glue are two-part liquid, the use of two parts in accordance with 10:1 of the proportion of mixing, and mixing equipment to fully stir (be sure to ensure that two parts mixed evenly), note: Must ensure that the mixing rod and the container cleaning (not with the rest of the glue contact);

2, vacuum, after the glue will be placed in the bubble-blowing device for bubble treatment, because the silica gel molecular tension is small, so in the vacuum when the bubble is very easy to accumulate, you can see a lot of bubbles very fierce platoon out. So in order to avoid the waste of glue, in the vacuum, as many times as possible in the discharge valve place gas;

3, after the elimination of bubbles, you can transfer glue into professional potting equipment for drip irrigation;

4, after the drop gum, placed 5-6 hours or so, when the surface does not stick to the hand (after the full table dry) can be packaged.

Five, security:

1, thermal silica gel for pure silicone products, does not contain any harmful substances, is environmentally friendly products, even if the human body direct contact will not have any adverse reactions;

2, this series of products is not flammable product, will not produce volatile substances, no risk of explosion;

3, this series of products in the curing process will not produce any harmful substances, the environment and no harm to the human body.

Six, Attention matters:

1, the thermal silica gel can not be mixed with other glue;

2, glue extrusion, to wait for its gel (generally 3-5 minutes or so) in order to carry out subsequent operations;

3, unused glue need to be sealed to save, as long as the glue gel can be used;

4, such as the previous use of plastic and the plastic time interval is very large, the container can be located in the position of the glue may be solidified, this is a normal phenomenon, will be solidified part of the glue can continue to use;

5, at room temperature in a cool place sealed preservation;

6, because this product is chemical products, your specific production process is not the Division I can control, so before using the sample, suitable, please rest assured use.